Making Sure You Choose a Painting Contractor That Delivers What You Need

You would have surely heard of traumatic experiences that people undergo with painting contractors. It’s not unusual for contractors to leave the job incomplete, use the wrong shade or give an improper finish to your rooms. Some even paint the wrong room! You can surely avoid getting into all such problems by doing your homework properly. There are a couple of things that need your consideration while looking for a paining contractor. Keep the following in mind while conducting your search for painting contractor:

Dependable Recommendations

You can surely depend on the recommendations of your friends and neighbors who have hired some painting contractor in the recent past. In fact, this is among the most dependable ways of finding a good contractor. You may call upon your friend and see the quality of work done by the contractor. This enables you to get first-hand information about the recommended contractor regarding the quality of work and his professionalism.

How busy is the contractor?

The worthiness of a contractor can also be judged by knowing how busy there are. Expect a good contractor with happy and satisfied customers to be busy. It is reasonable to conclude that his reputation is getting him more business and that keeps him busy. This piece of information coupled with recommendation from a known friend should suffice to zeroing on that contractor.

Reliable and experienced contractors should be able to offer ready references of the jobs executed by them, along with a portfolio containing photos. This enables you to see the kind of jobs they have been doing so far, thus allowing you to assess their suitability for your particular job. It will be worthwhile for you to talk to one or two of the references provided by the contractor before taking a final decision.

Insurance

Before finalizing the choice of your contractor, make sure to inquire if they possess appropriate insurance for protecting their workers and you, in case of any unfortunate accident that could harm your property or the workers. Be sure that the insurance policy protects you from any harm caused to any workers during the project.

Experience

Even if you are on a very limited budget, you should not entrust the job of painting your house to inexperience hands like students undertaking painting work as summer jobs. After all, you are going to spend your hard-earned money and would like to get a quality job. You don’t get your house painted every other day. Only an experienced contractor is equipped to handle structural obstructions, such as holes and walls damaged by water.

Sign a contract

And last, but not the least, it is extremely important to sign a formal contract with your contractor. Generally, contractors have a ready-to-sign contract with them. Do not sign the same unless you have understood the clauses contained. Also don’t hesitate to ask questions and seek clarifications. You may need to amend certain unacceptable clauses. It is always better to get something in writing rather than not having anything at all. You will find it helpful and reliable in case of any controversies arising during the course or at the end of the contract.

Concrete Moisture Conditions For The Application Of Moisture-Sensitive Flooring

You invest heavily in making your flooring attractive, durable, and long lasting. They indeed reflect a soothing ambiance and almost redefine your space. However, if you are about to apply moisture-sensitive flooring, you should make sure to take due care of all the associated threats. Otherwise, concrete moisture conditions can affect it adversely, leading to the flooring’s gradual destruction.

Consequently, this influences all the involved stakeholders whether space owners, users, construction managers, contractors, or floor installers. The speed of the project suddenly suffers a break down, budget goes out of control, and disturbance in everyone’s schedules becomes a commonality. Here are few considerations to help you reduce the risk of concrete moisture conditions affecting your moisture-sensitive flooring.

Applying the moisture-sensitive finishes successfully

Various factors contribute to the successful application of moisture-sensitive coatings and finishes. Prominent of these include:

    • Deep knowledge of the sources of moisture in concrete
    • The way the concrete’s moisture content dries with time
    • Factors that impact the drying rate
    • The drying percentage of the concrete before the finish installation
  • Allowing adequate drying time for the floor

Apropos to the last point, in the absence of sufficient drying time, various moisture sensitive finishes like timber, epoxy based terrazzo, surface coatings, vinyl, and carpet, among others, could lead to severe moisture related problems.

Estimating the drying time

Try to determine whether the concrete is dry enough before applying the moisture-sensitive flooring. This gives a settle idea whether the moisture is drifting away from the surface or moving toward it. Several methods help you significantly in this regard, such as:

    • Rule-of-thumb: This method allows drying time of 30 days for every 25-mm thick concrete slab since the last re-wetting or curing completion.
    • Water-cement ratio: As per research, for 0.5 value of water-cement ratio, the sufficient drying time for a 100-mm-thick concrete slab is three months, 150-mm thick slab is 12 months, and for a 200-mm thick slab is 12 months. These durations reduce to half if the slab can dry from both the sides.
    • Swedish Concrete Association method: This method modifies the standard drying time for ambient temperature, humidity, slab thickness, and curing and drying conditions.
    • Vapor emission rate approach: It indicates the moisture content remaining in the concrete. Depending on the flooring material, this approach recommends the ideal vapor emission rate to lie between 15 to 25 g/m2/24 h (3 to 5 lbs/1000 ft2/24 h).
  • Moisture content/Relative humidity approach: It states that the value of moisture should exceed 5.5% and humidity level should exceed 70% to lay down the textile flooring.

Measuring the acceptable level of moisture

Various methods exist to determine the moisture acceptance criterion in the concrete, which is fare enough for the application of moisture-sensitive finishes. These include:

  • Hygrometer test
  • Electrical resistance test
  • Calcium chloride test
  • Gravimetric moisture content test
  • Rubber mat test
  • Glass sheet test
  • Plastic sheet test
  • Test panel

Besides these, contour mapping also gives a settle indication of the high and low moisture areas in the concrete slab, which helps you effectively in the application of moisture sensitive flooring.

Five Times When We Use Hot Water, How Much We Use and How to Share

Unless you’re very thrifty or like cold water for some strange reason, here are 5 times when we use hot water. It is estimated that 1/3 of home energy costs go to heating water. A family of four probably uses about 70 gallons per day – add teenagers and you’re probably exceeding that number by a lot. Home water heaters usually hold 40 to 55 gallons of water – do the math and you’ll see why the last person in might get a cold shower and why you need a strategy to share the water. Of course, each of these actions use a mix of hot and cold water and we’re showing you the total of both, but the picture is still clear!

  Washing dishes by hand. If you leave the tap running – something many of us are guilty of doing – you’ll probably somewhere between 10 and 20 gallons to finish the job. Roughly a little less than half of that will be hot – or if you rinse in the hottest water possible it may be more than half.

A dishwasher. Did you realize a dishwasher actually uses less water than hand washing the dishes? Figure about 7 to 10 gallons of water per load. Your dishwasher may have a water miser cycle – use it!

Laundry machine. Figure 40 gallons of water per load on an older top-loading machine. A newer front loading machine will cut that number by half or more. Use a cold water detergent and you water use could be 0!

A bath. You’ll probably relax in about 30 to 40 gallons of water and depending on the temperature you like and the temperature your water heater is set at, about half or more of those gallons may come from the hot water heater.

A shower. A ten-minute shower uses 20 to 40 gallons, but have you ever tried to get a teen out of a shower in just 10 minutes? Again, depending on the mix about half of that water may come from your hot water heater.

The math is pretty simple. If a family of four takes 10 minute showers they may have just used up to 80 gallons of water! If Mom did the dishes at the same time, the water is going to be gone even sooner. So what does a family do? You can schedule so some family members take their showers in the morning and some at night. You can use the delay feature on some dishwashers so it does its work when no one is trying to shower or bathe. Another option is a tankless water heater that heats on demand so you never run out of hot water. Work it out as a family because no one wants a cold shower and no one wants to have to listen to complaints when the hot water is gone.